BT Aqua Cordless Telephone - Manual (Page 74)

74
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
2.
Register Handset
is highlighted. Press
Select
.
3. Bases are displayed. If necessary, scroll or to a new base
you wish to register your BT Aqua handset to and press
Select
.
4. Enter the system PIN and press
OK
.
5. The display shows
Searching Base X
(where X is the chosen
base number) then
Handset Registered
.
The handset is automatically assigned the next available
handset number.
Select a base
If your BT Aqua handset is registered to more than one base,
you can select which base to use.
1. Press
Menu
, scroll or to
Registration
and press
Select
.
2. Scroll to
Select Base
and press
Select
.
3. All base numbers are displayed. (In use) is added to bases
where the handset was previously registered to. Scroll or
to the base you want and press
Select
.
4. Display shows
Searching Base….
then the standby display
for that base.
Using additional handsets
Default PIN code = 0000
If registration is not successful first
time, please repeat the process again
incase the base registration period ran
out of time.
If there are already 5 handsets
registered to the base, the registration
will fail. You must de-register another
handset before you can register the
new one.