Using additional handsets – BT Aqua Cordless Telephone User Manual

Page 73

BT Aqua – Edition 3 - 24.04.07 – 8131

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Using additional handsets

You can use up to five BT Aqua additional handsets with your
BT Aqua base to extend your phone system without needing
to install extension sockets for each new phone.

Your BT Aqua handset can also be registered to up to 3 other
bases. You can then select the base you would prefer to use.

If you have purchased a BT Aqua multiple pack any additional
handsets come pre-registered to the base.

If you have purchased an additional handset separately you
must register it to your BT Aqua base before it can be used.

Registering an additional handset

At the base:

1. Press and hold

for 3 seconds until the base Power / In

use starts flashing. You have up to 60 seconds to register the
handset.

At the handset:

1. If the handset is new and the display shows

Please Register

Press

. The display shows

Registration

. Press

Select

If the handset has already been registered to another base the
standby display is shown. Press

, scroll

Registration

and press

Select