BT Aqua Cordless Telephone - Manual (Page 58)

58
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
1. Dial your telephone number and let it ring. After 20 rings you
will hear your outgoing message.
2. Press * , then enter your security code.
(Default setting = 0000)
3. Press 0 and your answering machine will switch on ready to
answer incoming calls.
Play messages
1. Dial your phone number. When you hear your outgoing
message, press * .
2. Enter your 4 digit PIN.
3. Use the keypad to operate your answering machine:
1 To hear main menu
2 To play messages
3 To play new messages
4 To skip back during messages
5 To delete during messages
6 To skip forward during messages
7 To set to answer only or answer and record
8 To record a new outgoing message
9 To set answer off
0 To set answer on
Answering machine
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer after
2 rings, if you do not have any new
messages, it will answer after 6 rings.
This means you can hang up after 3
rings knowing you have no new
messages, saving you time and the
cost of the call.
You cannot use this feature if you have
BT Answer 1571 or Call Minder active
as the call will be intercepted before
the 20 rings.
Your handset will automatically return
to standby if no button is pressed for 8
seconds or more.
If you have any new messages they
will be played after you have entered
your security PIN code.
If you enter an incorrect PIN code you
will hear ‘Incorrect security code.
Please enter your security code’. You
can try entering the code again. If it is
still incorrect you will hear the voice
prompt and your BT Aqua will hang
up.
If no button is pressed for 8 seconds or