BT Aqua Cordless Telephone - Manual (Page 31)

4. Scroll or to
Off
or
On
then press
Select
.
5. Press
Back
to return to the previous menu level or close the
handset cover to return to standby.
Redial length
1. Press
Menu
, scroll to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll to
Redial Length
and press
Select
.
4. Scroll or to
Short
or
Long
then press
Select
.
5. Press
Back
to return to the previous menu level or close the
handset cover to return to standby.
PABX access code
1. Press
Menu
, scroll to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll to
PABX Access Code
and press
Select
.
4. Scroll or to
On
,
Off
or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code e.g.
9 then press
Save
.
5. Press
Back
to return to the previous menu level or close the
handset cover to return to standby.
31 Handset settings
If your BT Aqua is connected to a
switchboard, you may need to enter a
1 digit access code in the dialing
sequence to be able to connect to the
outside line.
The access code will be displayed at
the beginning of a number on the
screen.
The access code will not be used when
you dial the number yourself (rather
than for example from the
phonebook). This allows you to make
calls to other switchboard extensions.
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]