BT Aqua Cordless Telephone - Manual (Page 52)

52
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
4. Scroll or to highlight
On
or
Off
and press
Select
.
5. Press
Back
to return to standby.
On-screen alert
When you have new answering machine messages, the screen
shows
You have X new messages
. All new messages are
indicated by a blue dot.
1. Press
Play
. Or, scroll or the list of messages. Press
Play
to hear the highlighted message.
Outgoing messages
The outgoing message is the message a caller first hears when
the answering machine picks up their call. There are 2 pre-
recorded outgoing messages to choose from (see note right)
or you can record your own.
Record your own outgoing message
1. Press
Menu
, scroll to
Answering Machine
and press
Select
.
2. Scroll to
Outgoing Message
and press
Select
.
3.
Record
is highlighted, press
Select
.
Answering machine
Answer delay sets the number of times
your BT Aqua will ring before the
answer machine picks up your call and
starts playing the outgoing message.
You can change this setting to
between 2–9 rings or Time Saver.
The default setting is 6 rings.
For information on Time Saver, see
Switch your answering machine on
remotely, page 58.
Answer and Record
The pre-set Answer and Record
outgoing message, that allows your
caller to leave a message, is “Hello,
your call cannot be taken at the
moment, so please leave your message
after the tone”.
Your Answer and Record outgoing
message can be up to 3 minutes long
and will replace the prerecorded
message.