Brother MFC J415W - Manual (Page 18)

Chapter 3
12
g
To cancel the Broadcast, press 1.
h
Press Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press (FAX).
b
Press a or b to choose Real Time TX.
Press OK.
c
Press a or b to choose On (or Off).
Press OK.
Note
• (MFC-J410W and MFC-J415W only)
If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Press (FAX).
b
Load your document.
c
Press a or b to choose
Overseas Mode.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.