Digital source set-up & connection – Bel Canto Design PRePro User Manual

Page 17

Page 1

PRePro User’s Guide rev1103

Digital Source Set-up & Connection

This section describes how to connect a digital
audio or video source, such as DVD, DISH, SAT,
GAME, CABLE BOX. We will use the SAT
INPUT and a satellite receiver as an example
for this instruction.

1. Using high quality video cable connect the

COMPONENT VIDEO OUT from the satellite
receiver to the SAT COMPONENT VIDEO
IN. Also connect a S-video cable to the input
so that the front panel screen can be used.

2. With a high quality optical conduit or coaxi-

al cable, connect the digital OUTPUT of the
satellite receiver to a digital INPUT on the
PRePro.

3. Turn on monitor and make sure the master

power switch on the left side of PRePro is
pressed in.

4. Press the SAT input key on the front panel

of the PRePro or provided remote control.
This will turn the unit on.

7. In the AUDIO INPUT menu SAT should be

set to the corresponding digital input.