Whirlpool LTE5243DQ - Manual (Page 21)

21
LEVEL WASHER/DRYER
IMPORTANT: Level washer/dryer properly to reduce excess
noise and vibration.
If washer/dryer is not level, use a 1" or 25 mm open-end or
adjustable wrench to turn the leveling legs counterclockwise
to lower the washer/dryer or clockwise to raise the washer/
dryer. Recheck levelness of washer/dryer and repeat as
needed.
HELPFUL TIP: You may want to prop up front of washer/dryer
about 4" (102 mm) with a wood block or similar object that
will support weight of washer/dryer.
With washer/dryer in its final location, place a level on top
edges of washer/dryer. Use side seam as a guide to check
levelness of sides. Check levelness of front using lid, as
shown. Rock washer/dryer back and forth to make sure all
four legs make solid contact with floor.
1.
Check levelness of washer/dryer
Place level here
Place level here
2.
Adjust leveling legs
Not Level LEVEL Not Level
3.
Plug into a grounded 3- or 4-prong
outlet