Whirlpool W10153554 - Manual (Page 7)

7
8. Plug refrigerators into grounded 3 prong outlets.
9. Move the refrigerators to their final locations. Make sure that
heater wires (orange wire and black wire) are not kinked and
are on top of the refrigerators within easy reach.
Make Final Connections
1. Connect the heater wires (orange wire and black wire) to the
heaters as shown.
2. Remove the adhesive backing from the connector cover. Put
the heater wires (orange wire and black wire) and their
connectors inside the connector cover.
3. Press the connector cover down onto the top of the
refirigerator next to the compressor cover as shown.
4. Make sure the power disconnect switch is ON.
A. Heater wires (orange
wire and black wire)
B. Heaters
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure do so can result in death or serious injury.
A
B
A. Power disconnect switch
A