Neff K8315X0 - Manual (Page 24)

en
24
Controls
Fig. 2
Switching on the
appliance
Switch on the appliance with the
On/Off button, Fig. 1/6.
The temperature display for the
refrigerator compartment, Fig. 2/4,
flashes until the appliance has reached
the set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■ After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
Do not put any food in the appliance
beforehand.
■
The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting the
temperature
Fig. 2
Refrigerator compartment
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button on refrigerator compartment 3,
until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display for the refrigerator
compartment 4.
Cool-fresh compartment
The temperature in the “cool-fresh”
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased.
(See chapter “Eliminating minor faults
yourself”.)
1 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
2 “Super” button refrigerator
compartment
Switches super cooling on and
off.
3 Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.
4 Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5 ON/OFF display
The ON/OFF display is lit when
the appliance is in operation.