Neff K8315X0 - Manual (Page 23)

en
23
Connecting the
appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in the com-
pressor may have flowed into the refrig-
eration system.
Before switching on the appliance for the
first time, clean the interior of the appli-
ance (see chapter “Cleaning the appli-
ance”).
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply. This
information can be found on the rating
plate. Fig. .
ã=
Warning
Never connect the appliance to elec-
tronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications (e.g. on ships or
in mountain lodges) which are not
connected directly to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The features of the models may vary.
The diagrams may differ.
Fig.
1
* Not all models.
A Refrigerator compartment
B Cool-fresh compartment
1-5 Controls
6 On/Off button
7 Light, refrigerator compartment
8 Glass shelf “EasyLift”
9 Fixed glass shelf
10 Extendable glass shelf
11 Delicatessen container
12* Butter and cheese compartment
13* Egg rack
14 Door shelf “EasyLift”
15* Bottle holder
16 Shelf for large bottles
17 Light, cool-fresh compartment
18 “Cool-fresh” container
19 Humidity filter
20 Humidity container
21 Ventilation opening