Brother IntelliFax-2820 - Manual (Page 119)

A - 2
Before you choose the ring pattern to
register
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Note
If the ring pattern you received is not on this
chart, please call your telephone company
and ask for one that is shown.
■ The machine will only answer calls to its
registered number.
■
The first two rings are silent on the
machine. This is because the fax must
«listen» to the ring pattern (to compare it
to the pattern that was ‘registered’). (Other
telephones on the same line will ring.)
■
If you program the machine properly, it will
recognize the registered ring pattern of the
‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
Registering the Distinctive Ring
pattern
Very important!
After you have set the Distinctive Ring feature
to ON, the receive mode is set to Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring
number, Manual mode means you must
answer all the calls yourself. You can not
change the receive mode to another mode
while the Distinctive Ring is set to on.
1
Press Menu/Set, 2, 0, 2.
2
Press
▲ or ▼ to select Set.
Press Menu/Set.
3
Press
▲ or ▼ to select the stored ring
pattern you want to use.
Press Menu/Set.
(You will hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
4
Press Stop/Exit. Distinctive Ring is now
set to on.
Turning off the Distinctive Ring
1
Press Menu/Set, 2, 0, 2.
2
Press
▲ or ▼ to select Off.
Press Menu/Set.
3
Press Stop/Exit.
Ring
Pattern
Rings
1 long-long
2 short-long-
short
3 short-short-
long
4 very long
(normal
pattern)
2.Distinctive
2.Distinctive