Behringer T1954 - Manual (Page 23)

23
TUBE ULTRAFEX T1954
6. SPECIFICATIONS
Audio inputs
Connectors XLR and 1/4" TRS connector
Type RF filtered, servo-balanced input
Impedance 50 kOhms balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced (unity gain)
CMRR typ. 40 dB, >55 dB @ 1 kHz
Audio outputs
Connectors XLR and 1/4" TRS connector
Type Electronically servo-balanced output stage (optional transformer-balanced)
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Max. Output Level +21 dBu, +20 dBm balanced and unbalanced
System specifications
Bandwidth 18 Hz to 30 kHz, +/-3 dB
Signal-to-noise ratio >100 dB, unweighted, 22 Hz to 22 kHz
THD 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
0.04 % typ. @ +20 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk <-100 dB, 22 Hz to 22 kHz
Bass Processor
Type “Dual Mode” Bass Processor
Low Mix variable (0 to 6)
Multiband Processor
Type “Natural Sonic” Processor with VSP (Variable Sound Processing)
NR Sensitivityvariable (0 to 6)
Tune variable (1 to 8 kHz)
Process variable (enhancer to exciter)
High Mix variable (0 to 6)
Surround section
Surround variable (0 to 6)
Function switches and controls
L/C Filter switches the bass sound from “Soft” to “Tight”
Effect In/Out activates the relay controlled hard bypass
Surround In/Out activates the Surround Processor
Warmth variable
Power supply
Mains voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General export model 100-120 V ~, 200-240 V ~, 50-60 Hz
Power consumption 25 Watts
Fuse 100-120 V ~: T 1 A H
200-240 V ~: T 500 mA H
Mains connection standard IEC receptacle
Physical
Dimensions approx. 3 1/2" (89.5 mm) x 19" (482.6 mm) x 8 1/2" (217 mm)
Net weight approx. 8.0 kg
Shipping weight approx. 10.0 kg
6. SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.