beautypg.com

Behringer Digital Delay DD600 User Manual

Digital delay dd600, Controls

background image

(1)

Select the effect mode via the MODE

switch (see table below).

(2)

Use the D.TIME control to fine-tune the

delay time. The delay time describes

how fast the signal repetitions will

follow after the original signal.

Depending on the selected mode,

you can adjust it between 1 ms and

2000 ms. In HOLD and TEMPO modes,

D.TIME is disabled.

(3)

The F.BACK (feedback) control adjusts

the amount of signal repetitions.

In HOLD mode, F.BACK is disabled.

(4)

LEVEL adjusts the effect level.

(5)

Use the ¼" TS IN connector to plug in

the instrument cable.

(6)

Use the ¼" TS TEMPO connector to

connect an external foot switch.

Use the foot switch to tap in the song

tempo (in TEMPO MODE).

(7)

The ¼" TS OUT A connector sends a mono signal to your amp. In E/D mode, it sends the

effect signal only.

(8)

Use the PAN OUT connector and OUT A to acheive a full stereo delay effect. In E/D mode,

it sends the dry signal only.

(9)

The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

(10)

Use the foot switch to activate/deactivate the effect. In HOLD mode, use the foot switch to start

and stop the recording. The signal is recorded while holding down the foot switch. Playback begins

immediately after releasing it.

DIGITAL DELAY DD600

Digital Stereo Delay/Echo Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL DELAY DD600.

This digital Delay effects pedal is designed to deliver 24-bit high-resolution stereo delay sounds

comparable to state-of-the-art studio processors. Thanks to its parameter controls, you’ll have

plenty of cool sounds at your disposal to handle every situation.

1. Controls

A50-00000-52317

(4)

(8)

(9)

(1)

(5)

(10)

(3)

(2)

(7)

(6)

MODE

Effect Description

D.Time

1

DELAY

Short delay

1-50 ms

2

Short to medium delay

50-200 ms

3

Medium to long delay

200-800 ms

4

Long delay

800-2000 ms

5

HOLD

Record and playback your performance

(Rec.time: max.2 s)

6

REVERSE

Signal is repeated in reverse

1000-2000 ms

7

E/D

Stereo delay using OUT A and PAN OUT

1-400 ms

8

TEMPO

Adds a quarter note

D.TIME disabled.

Tap tempo via external foot switch

9

Adds an eighth note

10

Adds a dotted eighth note

11

Add a triplet