Bunn SILVER SERIES JDF-4S - Manual (Page 9)

9 39992 071108
FIG 11 Product Dispense Switches - JDF-2S
Product Dispense Switch (Membrane Switch Machines)
A. Product Dispense Switch
Momentarily pressing and releasing one of the switches will initiate a timed dispense. Each station has three
different timed dispenses which are preset at the factory. Refer to DISPENSER USE section for preset volumes
and adjustment procedures.
B. Plus/Stop Switch
This switch can be used to “top-off” a beverage. Pressing and holding switch will initiate product flow from
the respective nozzle; releasing the switch will stop the flow. Momentarily pressing this switch during a timed
dispense will stop the flow.
C. Chilled Water Dispense Switch (Optional for JDF-4S only)
Pressing and holding switch will initiate chilled water flow from the nozzle; releasing the switch will stop the
flow.
FIG 12 Product Dispense Switches - JDF-4S
OPERATING CONTROLS (Continued)
FIG 13 Dispense Lockout Switch
P3612
Dispense Lockout Switch (JDF-2S shown)
This switch is located at the bottom front of the dis-
penser just behind the drip tray. It is used to turn ON
and OFF the Dispensing function. It is also used for
some programming and fill procedures.