Brother HL-3040CN - Manual (Page 4)

4
2
Remove the packing
material from the printer
a
Remove the packing tape from the outside of
the printer.
b
Open the top cover by lifting up on the
handle
a .
c
Remove the packing material from the inside of
the printer.
3 Install the drum unit and
toner cartridge
assemblies
a
Unpack the four drum unit and toner cartridge
assemblies and gently shake each of them
from side to side several times to distribute the
toner evenly inside the assembly.
b
Remove the protective cover by pulling on the
tab as shown in the illustration.
IMPORTANT
• Save all packing material and the carton in
case you have to ship your printer.
• DO NOT plug in the AC power cord yet.
Note
Do not touch the surface of the packing film. It
may contain toner powder which can stain your
skin and clothing.