beautypg.com

Share live video or video clips, Make call s – Nokia N96 User Manual

Page 137

background image

your device. Your service provider may send you the

settings over the air or give you a list of the needed

parameters.
To add a SIP address to a contact card, do the following:

1.

Press

, and select

Contacts

.

2.

Open the contact card (or start a new card for that

person).

3.

Select

Options

>

Add detail

>

Share video

.

4.

Enter the SIP address in the format

username@domainname (you can use an IP

address instead of a domain name).
If you do not know the SIP address for the contact,

you can use the phone number of the recipient,

including the country code, to share video (if

supported by the network service provider).

UMTS connection settings

To set up your UMTS connection, do the following:

Contact your service provider to establish an

agreement for you to use the UMTS network.

Ensure that your device UMTS access point

connection settings are configured properly.

Share live video or video clips

During an active voice call, select

Options

>

Share

video

:

1.

To share live video during the call, select

Live

video

.

To share a video clip, select

Recorded clip

. A list of

video clips saved in the device memory, the mass

memory, or a memory card (if available) opens.

Select the clip you want to share.
You may need to convert the video clip into a

suitable format to be able to share it. If

Clip must

be converted for sharing. Continue?

is shown,

select

OK

.

2.

Your device sends the invitation to the SIP address.

If the recipient has several SIP addresses or phone

numbers including the country code saved in

Contacts, select the desired address or number. If

the SIP address or phone number of the recipient is

not available, enter the address or number of the

recipient including the country code, and select

OK

to send the invitation.

Sharing begins automatically when the recipient

accepts the invitation.

Options during video sharing

to zoom the video (available for sender only)
to adjust the brightness (available for sender

only)

or to mute or unmute the microphone

or to switch the loudspeaker on and off

137

Make call

s