8 default parameters and settings – Nokia 9290 User Manual
Page 25

Compatibility tested PPP servers with the Nokia
9290 Communicator:
Cisco AS5300
Cisco AS5200
Shiva Access Switch
Shiva LanRover E+
Microsoft NT RAS 4.0
Ericsson Tigris AXC 623
Ascend Max 4004
Lucent PortMaster 3
Nortel/Bay Networks Versalar 8000
Morning Star PPPD
Various Linux/Unix based PPP daemons conforming
RFC 1661
6.8 Default parameters and settings
•
Async Control Character Map (ACCM) 0x00000000
•
Dynamic protocol timeout for LCP, IPCP, CCP, PAP, and
CHAP 3 seconds
•
Maximum Receive Unit (MRU) 1500
•
Magic number negotiation is on
•
Address and Control field Compression is on
•
Maximum configure request restart 10
•
Maximum configure Naks before failure 5
•
Link quality report interval 10 seconds
•
Compression method negotiation order (PPP compression
on by default):
•
Stac LZS mode 3
•
Stac LZS mode 4
•
Microsoft PPC
•
Predictor 1
•
PPP callback is off
•
TCP/IP-header Van Jacobson compression on
•
TCP maximum segment size (MSS) 536 bytes
•
Maximum time-to-live (TTL) 64
•
Default PPP idle timeout is 2 minutes
•
Show connection dialog is off
•
Proxy servers are off by default
•
Default data call parameters are normal analog data-
calls, autobauding, and no AT commands
•
Plain text login is allowed by default
•
Login scripts are not used by default
•
IP addresses and DNS addresses are requested dynami-
cally from server by default
•
For SSL and TLS, a collection of well-known certification
authorities’ root certificates has been installed and
marked as trusted
22