Sensor settings, Security settings, About security settings – Nokia E73 User Manual

Page 53: Device and sim card security

To define which profile is activated when you attach an accessory to your device,

select the accessory and

Default profile

To set the device to answer phone calls automatically after 5 seconds when an

accessory is attached, select

Automatic answer

. If the ringing type is set

Beep once

Silent

in the selected profile, automatic answering is disabled.

To illuminate the device while it is attached to an accessory, select

Lights

Sensor settings

Select

Menu

Ctrl. panel

Settings

and

General

Sensors

To set the device to silence an incoming call or snooze an alarm when you turn the

device face down, select

Turning control

Security settings

About security settings

Select

Menu

Ctrl. panel

Settings

and

General

Security

Avoid using codes that are similar to emergency numbers to prevent accidental

dialing of the emergency number. Codes are shown as asterisks. When you change

a code, enter the current code, then the new code twice.

Device and SIM card security

To change the PIN code, select

Phone and SIM card

PIN code

. The new code

must be 4 to 8 digits long. The PIN code protects your SIM card against

unauthorized use and is provided with the SIM card. After three consecutive

incorrect PIN code entries, the code is blocked and you need to use the PUK code

to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period, select

Phone and

SIM card

Keypad autolock period

To set a time-out after which the device is automatically locked and can be used

only if the correct lock code is entered, select

Phone and SIM card

Phone

autolock period

. Enter a number for the time-out in minutes or select

None

set off the autolock period. When the device is locked, you can still answer

incoming calls, and calls may still be possible to the official emergency number

programed into your device.
To set a new lock code, select

Phone and SIM card

Lock code

. The preset lock

code is 12345. Enter the current code and then the new code twice. The new code

Settings