Nokia 8801 - Manual (Page 49)

S e t t i n g s
48
To define how to use the service, select Menu > Settings > Connectivity >
Packet data > Packet data connection and one of the following:
• When needed — to set the packet data registration and connection to
established when an application using packet data needs it and closed when
you end the application.
• Always online — to set the phone to automatically register to an packet data
network when you switch the phone on. is shown.
Modem settings
You can connect the phone to a compatible computer by using Bluetooth wireless
technology. The phone can be used as a modem to enable EGPRS connectivity from
the computer.
To define the settings for connections from the PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point ,
activate the access point you want to use, and select Edit active access point .
Select Alias for access point , and enter a nickname for the currently selected
access point. Select Packet data access point , and enter the access point name
(APN) to establish a connection to an EGPRS network.
You can also set the dial-up service settings (access point name) on the computer,
by using the Nokia Modem Options software. See "Nokia PC Suite" on page 79. If
you have set the settings both on the PC and your phone, the PC settings are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another compatible
device (for example, a mobile phone), a compatible PC, or a remote Internet server
(network service).
Partner list
To copy or synchronize data from your phone, the name of the device and the
settings must be in the list of partners in transfer contacts. If you receive data
from another compatible device, the partner is automatically added to the list,
using the contact data from the other device.
Server sync and PC sync settings
are the original items in the list.
To add a new partner to the list, such as a new device, select Menu > Settings >
Connectivity > Data transfer > Options > Add transfer contact > Phone sync
or Phone copy , and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the partner list,
and select
Options > Edit .
To delete a selected partner, select Options > Delete . You cannot delete Server
sync and Phone sync .