Billion Electric Company 800VGT - Manual (Page 45)

Billion 800VGT Router
PPPoE Connections
Description: User-definable name for this connection.
VPI/VCI: Enter the information provided by your ISP. The Telkom standard settings are 8 and 35.
ATM Class: The Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a
single ISP account, sharing a single IP address. If users on your LAN have public IP addresses and can
access the Internet directly, the NAT function can be disabled.
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters
(case sensitive). This will usually be in the format of “username@ispname” instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters
(case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you the
information. Maximum input is 20 alphanumeric characters.
IP Address: This specifies if the router can get an IP address from the Internet Server Provider (ISP)
automatically or not. Please click Obtain an IP address automatically via DHCP (default setting) client to
enable the DHCP client function or click Specify an IP address to disable the DHCP client function, and
specify the IP address manually. To connect to the Telkom network, please leave this at the default value.
Authentication Protocol: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap.
Connection
Always on: If you want the router to establish a PPPoE session when starting up and to
automatically re-establish the PPPoE session when disconnected by the ISP.
Connect on Demand: If you want to establish a PPPoE session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the
Internet).
45
Chapter 4: Configuration