Billion Electric Company 800VGT - Manual (Page 29)

Billion 800VGT Router
Configuration
When you click this item, you will be able to following sub-items to configure the ADSL router.
- LAN, Wan, System, Firewall, VPN, VoIP, QoS, Virtual Server, Time Schedule and Advanced
These functions are described below in the following sections.
LAN - Local Area Network
Here are the items within the LAN section:
Bridge Interface
Ethernet
IP Alias
Ethernet Client Filter
Wireless
Wireless Security
Wireless Client Filter
Port Settings
DHCP Server
.
Bridge Interface
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two
VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface VLAN Port (Always starts with)
Ethernet P1 / P2 / P3 / P4
Ethernet1 P2 / P3 / P4
Ethernet2 P3 / P4
Ethernet3 P4
Management Interface: To specify which VLAN group is allowed to do device management - i.e. web
management.
Note: NAT/NAPT can be applied to management interface only.
29
Chapter 4: Configuration