Toshiba Portege R400 - Manual (Page 58)

3-20 User’s Manual
Features, Utilities and Options
7. Rotate the keyboard back into place and secure the keyboard brace as
described in the previous section.
8. Install the battery pack. Refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes , for details.
9. Turn your computer over.
Installing a memory module (Slot B)
To install a memory module, follow the steps as detailed below:
1. Set the computer to Boot Mode and turn its power off - make sure the
Power indicator is off (refer to the Turning off the power section in
Chapter 1, Getting Started , if required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. In Laptop mode, turn the computer upside down and remove the battery
pack (refer to the Replacing the battery pack section in Chapter 6,
Power and Power-Up Modes , if required).
4. Loosen the screw securing the memory module cover in place - please
note that this screw is attached to the cover in order to prevent it from
being lost.
5. Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-10 Removing the memory module cover
Use a point size 0 Phillips screwdriver.
Screw