beautypg.com

Turning on the power, Starting up for the first time – Toshiba Portege R400 User Manual

Page 20

background image

1-8

User’s Manual

Getting Started

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the

Monitoring of power condition

section in Chapter 6,

Power and Power-Up Modes

for more information.

1. Open the display panel.

2. Slide the Power Button Lock Switch to the right.

3. Press the power button.

Figure 1-6 Turning on the power

Starting up for the first time

The Microsoft Windows Vista™ Startup Screen will be the first screen
displayed when you turn on the power. Follow the on-screen instructions on
each screen in order to properly install the operating system.

After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section

Starting

up for the first time

for more information.

If a USB floppy diskette drive is connected, please make sure that it is
empty - if a floppy diskette is in the drive, press the eject button and
remove it.

Volume cannot be adjusted during Windows Setup.

Power button

Power Button

Lock Switch

When it is displayed, be sure to read the Software License Terms
carefully.