Toshiba Equium M100 (PSMA8) - Manual (Page 51)

User’s Manual 3-7
Getting Started
3. Press the computer's power button and then release it.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Windows ® XP Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.
Be sure to read the Windows
® Operating System End User License
Agreement carefully.
Turning off the power
The power can be turned off in one of three modes, either Shutdown Mode
(also known as Boot Mode), Hibernation Mode or Standby Mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode, no data is saved and the
computer will boot to the operating system's main screen.
1. If you have entered data, save it to the hard disk, to writable optical
media or to a disk.
2. Make sure all disk activity has stopped, then remove the optical disc or
floppy disk.
Make sure the built-in hard disk drive and optical disc drive indicators
are off before you switch the computer off. If you turn off the power while a
disk is being accessed, you can lose data or damage the disk.