beautypg.com

Disconnecting the lan cable – Toshiba NB200 User Manual

Page 66

background image

User’s Manual

4-15

Operating Basics

1. Turn off the power to the computer and to all external devices

connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear

the latch click into place.

Connecting the LAN cable

3. Plug the other end of the cable into a LAN hub connector or router.

Check with your LAN administrator and hardware or software vendor

before using or configuring a network connection.

Disconnecting the LAN cable

To disconnect the LAN cable, follow the steps as detailed below:

1. Pinch the lever on the connector in the computer’s LAN jack and pull

out the connector.

2. Disconnect the cable from the LAN hub or router in the same manner.

Check with your LAN administrator and hardware or software vendor

before disconnecting from the hub.

1. LAN jack

2. LAN cable

1

2

When the computer is exchanging data with the LAN, the LAN Active

indicator glows amber. When the computer is connected to a LAN properly

and is available to exchange data, the Link indicator glows green.

Make sure the LAN Active indicator (amber LED) is out before you

disconnect the computer from the LAN.