beautypg.com

Data verification, How to learn more about toshiba disc creator – Toshiba NB200 User Manual

Page 56

background image

User’s Manual

4-5

Operating Basics

You might not be able to use the 'Disc Backup' function of TOSHIBA

Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW,

DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with

other software on a different optical media recorder.

If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R

(Double Layer) disc that you have already recorded to, you might not be

able to read the added data under some circumstances. For example, it

cannot be read under 16-bit operating systems, such as Windows 98SE

and Windows Me, while in Windows NT4 you will need Service Pack 6

or later, and in Windows 2000, you will need Service Pack 2. In addition

to this, some DVD-ROM and DVD-ROM / CD-R/RW drives cannot read

this added data regardless of the operating system.

TOSHIBA Disc Creator does not support recording to DVD-RAM discs -

to achieve this you should use Windows Explorer or another similar

utility.

When you back up a DVD disc, be sure that the source drive supports

recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R

(Double Layer) or DVD+RW media - if this is not the case then the

source disc might not be backed up correctly.

When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,

DVD+R (Double Layer) or DVD+RW disc, be sure to use the same type

of disc.

You cannot partially delete any data written to a CD-RW, DVD-RW or

DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD

you should follow the steps below before you begin the write/rewrite

process:
1. Display the setting dialog box by one of the following two steps:

Click the settings button (

) for writing on the main toolbar in the

Data Disc mode.

Select Setting for Each Mode Data Disc in the Setting menu.

2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator

information.

Opening the TOSHIBA Disc Creator Manual

Start All Programs TOSHIBA CD&DVD Applications Disc

Creator Help