Toshiba AT100 User Manual
Page 72
User’s Manual
6-16
TOSHIBA AT100
(Sample Illustration) Connecting the power cord to the AC adaptor (3-pin plug)
2. Connect the AC Adaptor (provided with your TOSHIBA tablet or
purchasing separately) to the Dock.
3. Plug the power cord into a live wall outlet.
4. Turn on your TOSHIBA Tablet.
5. Align the docking mark on your tablet with that on the dock.
6. Connect the docking interface on your tablet with the docking connector
on the dock.
(Sample Illustration) Connecting your tablet with the dock
Either a 2-pin or 3-pin adaptor/cord will be included with the tablet
depending on the model.
You must connect the AC adaptor before you connect to the dock.
When the dock is connected to your tablet, you can not use the following
ports on your tablet: DC IN 19V jack and HDMI port.