Toshiba AT100 - Manual (Page 71)

User’s Manual 6-15
TOSHIBA AT100
(Sample Illustration) Connecting an HDMI cable
TOSHIBA USB Tablet Dock
Connecting the AC adaptor
1. Connect the power cord to the AC adaptor.
(Sample Illustration) Connecting the power cord to the AC adaptor (2-pin plug)
1. HDMI port 2. HDMI cable
1
2
Please connect or disconnect an HDMI device to or from the tablet under
the following conditions:
■
The tablet is turned on.
■
The tablet is completely turned off.
Do not do so when the tablet is in Sleep Mode or Hibernation Mode.
■
When you connect a television or external monitor to the HDMI port,
the display output device is set to HDMI.
■
When you unplug the HDMI cable and re-plug it, please wait at least
5 seconds before you re-plug the HDMI cable again.