Toshiba AT100 - Manual (Page 12)

User’s Manual 1-5
TOSHIBA AT100
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1. Choose the language as you want and then tap Start to continue.
2. Connect to a wireless network via Wi-Fi.
You may also skip this section and turn Wi-Fi on later in the Settings
screen.
3. Choose Google Location Service™ and tap Next to continue.
4. Set date and time, and tap Next to continue.
5. Register or log in with a Google™ account. You may also skip this
section by tapping Skip.
Turning off the power
If you are not going to use your tablet for a long time, shut it down. You can
also turn the LCD off in order to extend the battery life.
Shutting Down the Tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the main screen when the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
■
Press the Power button for 2 seconds and select OK to turn off the
tablet.
2. Turn off any peripheral devices connected to the TOSHIBA AT100
tablet.
The last step will be automatically skipped if you choose to skip Wi-Fi
connection.
■
Never turn off the power while an application is running. Doing so could
cause loss of data.
■
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.
■
In any emergency case, you can also press the power button for about
six seconds to force power off.
Do not turn the tablet or peripheral devices back on immediately - wait a
short period to avoid any potential damage.