beautypg.com

How to delete the face recognition data, How to launch the help file, Windows logon via toshiba face recognition – Toshiba SATELLITE A500 User Manual

Page 117

background image

User’s Manual

4-33

A500/A500D series

12. The Management screen is displayed.

The registered account name will be displayed. Clicking on it will cause
the captured image of your face to be displayed on the left.

How to Delete the Face Recognition Data

Delete image data, account information, and personal record data created
during registration. To delete the Face Recognition Data, follow the steps
as described below:

1. To launch this utility, click Start -> All Programs -> TOSHIBA ->

Utilities -> TOSHIBA Face Recognition.

The Management screen is displayed.

2. Select a user which is deleted in the Management screen.

3. Click the Delete button. “You are about to delete the user data.

Would you like to continue?” will be displayed on the screen.

If you do not want the data to be deleted, click the No button and
you will then be returned to the Management screen.

Clicking on the Yes button will remove the selected user from the
Management screen.

How to launch the help file

For further information on this utility, please refer to the help file.

1. To launch the help file, click Start -> All Programs -> TOSHIBA ->

Utilities -> TOSHIBA Face Recognition Help.

Windows Logon via TOSHIBA Face Recognition

This section explains how to login to Windows with TOSHIBA Face
Recognition. Two authentication modes are provided.

1:N Mode Login screen: If the face authentication tile is selected by
default, you can log in without using the keyboard or mouse.

1:1 Mode Login screen: This mode is essentially the same as 1:N
mode, but the Select Account screen will appear before the Display
Captured Image
screen, and you will need to select the user account
to be authenticated in order to start the authentication process.

1:N Mode Login screen

1. Turn on the computer.

2. The Select Tiles screen will be displayed.

3. Select Start face recognition (

).

4. “Please face to the camera” will be displayed.

5. Verification will be performed. If the authentication is successful, the

image data taken in step 4 will be faded in and placed over one another.

If an error occurs during authentication, you will be returned to the
Select Tiles screen.

This manual is related to the following products: