Toshiba Equium P200 - Manual (Page 67)

User’s Manual 4-8
Operating Basics
7. At the User’s Fingers screen, select the finger you wish to enroll from
the illustration and then click Next. On this screen please be aware that
any previously enrolled FingerPrints would have green check marks,
while the FingerPrint you are about to enroll will have a red check mark.
If any of the previously enrolled FingerPrints is selected again, the latest
information will be enrolled and any previous information over-written.
8. At Advanced Security screen, select whether you wish tto enable the
security function, and then click Next.
9. At Finalization screen, click Finish - this will complete the FingerPrint
registration process.
Window Logon via FingerPrint Authentication
If required, you are also able to use FingerPrint authentication in place of
the usual Windows logon process using your username and password.
This method is specially useful where there are many users using the same
computer as it removes the need for actual user selection when the system
is started.
FingerPrint Authentication Procedure
1. Start up the computer.
2. At the Logon Authorization screen, choose any of the enrolled fingers
and swipe the FingerPrint on the sensor - If the authentication process
is successful, the user will automatically be logged into Windows.
FingerPrint Power-on Security
General
The FingerPrint authentication system can be used to replace the keyboard
based password authentication system that is used when the computer is
turned on.
If you do not want to use the FingerPrint authentication system for
password authentication when the computer is turned on, but instead prefer
to use the keyboard entry method instead, simply press the BkSP
(backspace) key or the ESC/Rotation button when the FingerPrint Power-
on Security screen is displayed. Using this process will switch the
password input screen across to the keyboard based entry screen.
If the FingerPrint authentication process fails you will need to log into
Windows using the appropriate username and password. In addition, you
should use this manual login process if Finger Print authentication fails for
three consecutive tries - a warning message will be displayed when
authentication is not normal or is not successful within a fixed duration.