Bosch WTA 4410 CN - Manual (Page 17)

17
Before using
the dryer for
the first time
Before you use the dryer for the first
time:
1. Read these operating
instructions carefully.
2. Check that the supply voltage
corresponds with the voltage
specifications on the rating
plate of the dryer (see picture
page 24).
3. Remove all objects from the
drum.
4. Check the dryer for visible
damage. If damages are found
contact your dealer.
5. Wipe the inside of the drum
with a damp cloth.
6. Conduct an appliance test, see
page 12.
7. If the dryer does not work,
switch the dryer to "Off".
Look in the troubleshooting
section (page 23) of the
operating instructions and find
the problem.
Temporary
disconnection
of the dryer
Operate your dryer only when you
are at home. If you go on vacation
or are not using your dryer for an
extended period of time, you
should:
1. Turn off the circuit breaker.
2. Unplug the dryer.
3. Clean the lint filter.
Laundry
Identification
of fabrics
Observe the treatment symbols on
the textile labels. They provide
valuable information as well as
limitations about the drying
process.
Do not dry the following textiles in
the dryer:
- AirĆtight textiles
(e.g. rubberized)
- Delicate fabrics (silk, synthetic
curtains)
i Use the time program Air fluff"
to dry articles containing foam
rubber or similarly textured
rubberĆlike materials.
Drying tips
In principle, the following applies to
all drying programs:
- To ensure a uniform drying
result, sort the laundry
according to fabric type and
drying program.
- Fasten zippers, hooks and
eyes. Fasten loose belts,
apron strings, etc.
- Do not overdry easyĆcare
laundry ć risk of wrinkling!
Leave laundry to dry in the air.
- Do not iron laundry immediately
after drying. Place the laundry
in a pile for a short while.
Residual moisture will then be
distributed uniformly.
- Knitted textiles (e.g. TĆshirts,
cotton jersey laundry) often
shrink when dried for the first
time. Do not use the "Very
dry/Extra dry" program.