Toshiba Magnia Z300 - Manual (Page 37)

MegaRAID Configuration Console
Advanced
37
Field Description
Fail Physical Drive if
Error Threshold
Reached Marks drive as Failed when error threshold is
reached. After marking as Failed this drive can’t be
used anymore. Drive status can only be changed from
the BIOS configuration utility. This option is not set
by default.
Start Rebuilding if
Error Threshold
Reached MegaRAID Configuration Console begins an auto-
matic rebuild if the array has more than a specified
number of errors. If so, it starts an automatic rebuild.
* - This option is valid only for arrays set for reliabil-
ity mode (RAID 1 mirrored arrays.)
Check Array for
Rebuild at Startup MegaRAID Configuration Console checks the num-
ber of errors in the arrays to see if they need rebuild-
ing.
Stop Rebuilding if
Rebuilding Error
Threshold Reached If the maximum number of errors allowed is found in
an array during rebuild, MegaRAID Configuration
Console will stop the rebuild.
Make Contents of
Array Drives Identical
after Check Consis-
tency error found If MegaRAID Configuration Console finds mis-
matches between two mirrored (RAID 1) arrays, it
will copy the data from one drive to the other to make
them identical.
* - This option is valid only for arrays set for reliabil-
ity mode (RAID 1 mirrored arrays.)
Delete Activity Log
Files when it reaches
maximum Allowed
Size This deletes the activity log file if it reaches the maxi-
mum allowable size (as set in the box below this
item.)
If checked, the activity log file is overwritten when it
reaches the maximum size. If not checked, the file
stops updating when it reaches the maximum size and
is not updated anymore.
Activity Log File Size Use this box to select the maximum size for the activ-
ity log file.