Toshiba Magnia Z300 User Manual
Page 16
MegaRAID Configuration Console
Using MegaRAID Configuration Console
16
The functions of the left button are as follows:
Right
This frame displays the type of actions you can perform. It
also displays extended options and links when certain links
are selected.
Name
Description
Scan Devices
Rescans system for new hard drives. After pressing this but-
ton, the driver rescans all PCI devices. You will notice a sig-
nificant decrease in system performance for a few seconds.
Config View
Displays the RAID configuration, media errors, and status of
the drives and arrays. It also allows you to start activity on
particular array.
v
Logical View - displays information about the arrays.
v
Physical View - displays all physically attached hard disk
drives attached to the MegaRAID controller.
Device
Progress
Displays the progress bar for the current activity on the
MegaRAID controller. The progress bar displays the time
left and percentage complete. Possible activities include the
following:
v
Rebuild
v
Consistency Check
Log Data
Displays activity log information. All activities add records
to the activity log file. The size of this file can be modified by
clicking on the Advanced button
Advanced
Allows you to modify the parameters for the RAID system.
Back Plane
Some systems can have built-in back plane devices. Mega-
RAID Configuration Console supports several types of back
planes.
See the user manual for your system.
Frame
Description