Toshiba Magnia Z300 - Manual (Page 13)

MegaRAID Configuration Console
Using MegaRAID Configuration Console
13
Using MegaRAID Configuration Console
This section describes the MegaRAID Configuration Console
software utility. You can use the software utilities that come with
MegaRAID Configuration Console to:
v Get information about the configuration
v Track the health of the arrays and physical drives
v Track S.M.A.R.T. status of the physical drives
v Rebuild an array
v Perform a consistency check on array..
v Check error log where all drive failures are reported
Logging on to the RAID Server
To log on to the RAID Server, enter the Internet address in the
Internet browser. The following screen will appear.
Select the RAID Server you would like to configure by clicking
on it. In this example, we have only one listed.