Log data – Toshiba Magnia Z300 User Manual
Page 34
MegaRAID Configuration Console
Log Data
34
To exit this page, click on “Config View” or “Scan Devices”.
Log Data
This screen displays the Log Data screen. Use the scroll bar to
view the log.
Stripe Size
This field displays the stripe size. A stripe size is the minimal
amount of data that can be written to the drive in one write.
NOTE: RAID level 1 does not have a stripe size
parameter. Stripe size parameters are available
for RAID level 0 and RAID level 10 array sets
only. The stripe size parameter can only be set
when the array is created. See the hardware
manual for your MegaRAID IDE controller for
more information.
Capacity
This field displays the actual size of the array. This size is
reported to Operating System.
Error
Threshold
This parameter is user defined. Users can define the error
threshold on each drive. For more information on how to set
the error threshold, see the Advanced menu description.
Constituent
Physical
Drives
This field displays the physical drives joined to an array.
Field
Description