beautypg.com

Lan -29 – Toshiba Satellite M40 (PSM42) User Manual

Page 93

background image

User’s Manual

4-29

Operating Basics

Security

Two advanced security mechanisms ensure a high level of security:

Authentication prevents access to critical data and makes it impossible

to falsify the origin of a message.

Encryption prevents eavesdropping and maintains link privacy.

Wireless communication switch

You can enable or disable Wireless LAN and Bluetooth functions, with the

on/off switch. No transmissions are sent or received when the switch is off.

Slide the switch toward the left of the computer to turn it on and toward the

right of the computer to turn it off.

Turn the computer off when you enter an airplane and check the carrier’s

regulations before you use a computer on board.

Wireless communication Indicator

The wireless communication indicator indicates the status of the wireless

communication functions.

If you used the Task Bar to disable W-LAN, restart the computer or follow the

procedures below to enable the system to recognize W-LAN. Open or click
the following:

start

,

Control Panel

,

System

,

Hardware Device

Manager

,

Network adapters

,

TOSHIBA Wireless LAN Mini PCI

Card

and

enable

.

LAN

The computer has built-in support for Ethernet LAN (10 megabits per second,

10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or

Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).(depend

on model you purchased) This section describes how to connect/disconnect

to a LAN.

Set the switch to off in airplanes and hospitals. Check the indicator. It will

stop glowing when the wireless communication function is off.

Indicator status

Indication

Indicator off

Wireless communication switch is set to off.

Automatic power down because of overheating.

Power malfunction

Indicator glows

Wireless communication switch is on. Wireless

LAN or Bluetooth is turned on by an application.

Do not install or remove an optional memory module while Wake-up on

LAN is enabled.

The Wake-up on LAN function consumes power even when the system is

off. Leave the AC adaptor connected while using this feature.