Toshiba Satellite Pro P100 (PSPAE) - Manual (Page 103)

User’s Manual 6-11
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the positioning
lugs on the battery face the positioning holes on the computer.
4. Gently press the battery into the battery bay until the latch clicks into
place.
5. Ensure the battery pack lock is moved into its locked position.
Installing the battery pack
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Incorrect positioning of the battery may result in damage to your computer.