Toshiba DV734 - Manual (Page 54)

54
Basic playback
(continued)
To start playback in stop mode
Press PLAY .
To pause playback (still mode)
Press PAUSE during playback.
To continue playback from still mode
Press PLAY .
To stop playback
Press STOP .
To remove a disc
1 Press EJECT on the TV control panel or on the remote control.
2 Wait for the disc drive to eject the disc, and then remove the disc from the slot.
Disc playback reminders
• If the TV does not operate properly, static electricity build-up may be the cause. Turn off the
TV, and then disconnect the power cord from the AC outlet. Reconnect the power cord, and
then press
on the TV control panel or on the remote control to turn on the TV again.
• If an incompatible disc is loaded, one of the following messages will appear on-screen:
“Incorrect Disc”, “Disc region incorrect” or “Enter Password”, depending on the type of the
loaded disc. If this is the case, check your disc again (see pages 55 and 77).
• Some discs may take a minute or so to start playback.
• When you load a disc with the playback side facing forward, “Reading” appears on-screen
but it will be replaced by “Incorrect Disc”. Eject the disc and load it again, making sure the
playback side is now facing backward.
• The playback resume function may not work on some discs.
• Some DVDs may have fixed playback operations designed by the DVD manufacturer. Since
the TV follows this design, some playback features may not be available. You may refer to
the instructions accompanying the DVD.
• In many instances, a menu screen will appear after disc playback. Prolonged display of an
on-screen menu may damage your television set, permanently etching that menu image on
the screen. To avoid this, turn off the TV once disc playback is completed.
• There may be a slight delay between the button press and the function it activates.
• The prohibition symbol “
X” appears on the upper right corner of the screen when you try to
employ a playback function that is not available on the disc, or that is not yet accessible at
this time. This does not indicate a problem with the TV.