Toshiba DV734 User Manual
Page 19
19
Automatic station presetting with the built-in tuner
Automatic station presetting with the built-in tuner
Perform this feature to search for and store new analogue and digital TV programmes after the
Automatic Installation (see pages 14-15).
Preparation:
Make sure your antenna is connected to the aerial input (see page 11). Select ATV or DTV (see
page 16), and then press
MENU SETUP
or
DIGITAL MENU
.
1
Press
to select
Channel, and then press ENTER/CH LIST
.
2
In ATV mode:
(1) Press
to
select
Country, and then press
to select your country.
(2) Press
to select
Auto Tuning, and then press ENTER/CH LIST
.
(3) A message prompt will appear with option
to delete previously stored channels.
Press
to select
Yes or No, and then
press
ENTER/CH LIST
.
The automatic tuning will search for available
channels and store them in a correct order.
During the search the sound is muted. When all
channels have been stored, the normal TV
screen will appear.
*
In DTV mode:
Perform the steps 4-6 as detailed in
DTV auto tuning/Setting Antenna or Cable on pages
Note:
• The DVB-C function cannot be initiated when switching the setting of
Ant/Cable In to
Cable. Please check if this function is supported in the place you live, and if the latest
firmware has been installed on your TV (see
DVB-C Notice on page 2 and DVB-C
function notice on page 12).
/
/
/
Country Germany
>>
>>
>>
: Adjust
/
/
: Adjust
Auto Tuning will delete all previously
stored channels -
Do you want to proceed?
Yes
No
EXIT : Cancel
Analogue Channel Found
0