beautypg.com

Basic operation, Continued), Information display – Toshiba DV734 User Manual

Page 24: Sleep timer

background image

24

Basic operation

(continued)

Note:

• In the

Basic Service

Information, the name of
channels and services
appears in full not in
abbreviation.

• Depending on the

availability of DVB-C
function, the

Basic

Service Information here
may be different from that
shown on your TV.

• Subtitles are displayed on

the channel banner, but
some broadcasts may not
provide this service.

Information display

In ATV mode:
Press

to display the channel number and sleep

timer settings information on the screen. Current
settings for the sound mode, picture size, and
resolution (if in use) are also displayed. The
information will appear for approx. 5 seconds.

In DTV mode:
When you switch channels, a channel banner is displayed for a few seconds. The channel
banner shows information such as current date and time, DTV channel number, station, and
messages from the DTV service providers, etc.

(1) While watching a programme, press

to display the channel banner. The channel

banner will disappear after a set time. You can change how long the channel banner is
displayed (see page 46 for details).

(2) Press

again to display the

Basic Service Information screen.

You can verify the signal strength and quality of the selected service here. If necessary,
adjust the direction of antenna to obtain the maximum signal strength.
A short event description of an event can also be viewed here. For an extended description
of an event, you can view it in the EPG menu (see page 53).

(3) Press

to remove the display of the

Basic Service Information.

Sleep timer

Press

SLEEP

to set the sleep timer to turn off your TV/DVD after a set length of time. Each

time you press the

SLEEP button, the timer setting increases in 10 increments (Off, 0h 10m, 0h

20m, ..., 2h 0m). After the setting is programmed, the display will begin 30 seconds in advance
to remind you that the sleep timer is enabled.
To confirm the sleep timer setting, press

SLEEP

and the time remaining will appear for a

few seconds. To cancel the sleep timer, press the

SLEEP button repeatedly until Off appears.

11
BBC1

Sleep Timer

1h 40m

NICAM ST

Auto

576i

Service no.

Service name

Duration bar

Genre

Time and
Date

Lock status

Starting/Ending
time of current
programme

Parental rating

DVB Teletext available

DVB Subtitle available

Pay TV

Audio mode

Basic Service Information

Service Name: 004 bid-up.tv

81%
90%

Service ID: 0001, running
Multiplex: 40C (TSID 03ec, ONID 22f1)
Network: Crystal Place (ID 3402)
Bit Error Level: 5.165 e-02

Signal Strength

Signal Quality

No Event Name

No descreption

ENTER

EXIT

i