Toshiba Satellite P30 - Manual (Page 92)

User’s Manual 4-25
Operating Basics
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with
the IEEE 802.11a+g, and 802.11g wireless LAN standards.
It supports the following:
■ Automatic Transmit Rate Select mechanism in the transmit range of 54,
11, 5.5, 2 and 1 Mbit/s. (54 Mbps is available only with 802.11a or
802.11g.)
■ Advanced Encryption Standard (AES) data encryption, based on 128bit
encryption algorithm. (Revision G, A/G combo type.)
■ Frequency Channel Selection (5GHz and 2.4 GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN
does not function on a wireless LAN.
Security
1. Be sure to enable WEP(encryption) function. Otherwise you computer
will allow the illegal access by outside through Wireless LAN to cause
illegal intrusion, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommend the customer to enable the WEP
function.
2. TOSHIBA is not liable for the eavesdropping of data due to the use of
Wireless LAN and the damage thereof.
Wireless communication switch
You can enable or disable wireless LAN function, with the on/off switch. No
transmissions are sent or received when the switch is off. Slide the switch
forward to turn it on and backward to turn it off.
Wireless communication LED
The LED indicates the status of the wireless communication functions.
Wake-up on LAN does not function on a Wireless LAN.
Turn the switch off in airplanes and hospitals. Check the LED. It stops
glowing when the wireless communication function is off.
LED status Indication
LED off Wireless communication switch is set to off
LED glows Wireless communication switch is on