Toshiba Satellite P30 - Manual (Page 146)

User’s Manual 8-18
Troubleshooting
LAN
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Character display
becomes garbled
during a
communication.
In data transmission, make sure the parity bit
and stop bit settings correspond with those of
the remote computer.
Check the flow control and communication
protocol.
You cannot receive an
incoming call. Check the "rings before auto answer" setting in
your communications application.
If problems persist, contact your dealer.
Problem Procedure
Problem Procedure
Cannot access LAN
LAN jack and the Wake
up on LAN does not
work.
Check for a firm cable connection between the
LAN HUB.
Make sure the AC adaptor is connected. You
cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.
Problem Procedure
Cannot access
Wireless LAN
Make sure the computer's wireless
communication switch is set to on.
Use the Config Free program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN
administrator.