Toshiba External SuperMulti Drive - Manual (Page 19)

User’s Manual EN-19
TOSHIBA External SuperMulti Drive
Caution: Possible Error
External SuperMulti Drive record data on the disc by applying laser light
onto the surface of the disc, and therefore writing errors may occur if you
use a damaged disc, for example. Be sure to eliminate the following error-
causing elements before you start writing:
* The following settings are recommended for all External SuperMulti
Drive:
1. Avoid a situation that requires multitasking, and remove turn off
the screen saver.
A buffer underrun may occur if the system multitasks while the External
SuperMulti Drive is writing/erasing.
2. Block any outside attempt to access the host PC during a writing
session.
An error may occur if another user accesses the printer connected to
his/her the system via the network during a writing session.
3. Disable the CD auto-run feature of the CD.
Inserting an auto-run-enabled CD in to another drive connected to the
same system during a writing/erasing session may cause an error.
The system doesn’t
read the disc.
See if the system detects the drive.
Make sure you use the types of discs that
are supported by the drive.
See if the LED turns into orange.
Make sure you inserted the disc with the
label facing up.
Make sure you are using the right program
for disc playback.
See if the disc is clean.
See if any congealing has occurred.
Make sure the region code of the drive
matches the disc number.
Problem Meaning / Solution