Toshiba External SuperMulti Drive - Manual (Page 13)

User’s Manual EN-13
TOSHIBA External SuperMulti Drive
Windows Vista
1. Click Start - Control Panel - System and Maintenance - System -
Device Manager.
2. Check the information. If a yellow “exclamation point” appears next to
Universal Serial Bus Controller, contact the card or PC manufacturer.
Confirming the Installation of the Device Driver
Confirming Use [Device Manager]
Windows XP
1. Go to Start - Control Panel - Performance and Maintenance.
2. Click the System icon in the “Performance and Maintenance” window.
3. Select the Hardware tab in the “System Properties” window.
4. Click the Device Manager button. In the “Device Manager” window,
the name of the External SuperMulti Drive appears under “DVD/CD-
ROM drives” if the driver is installed properly.
Windows Vista
1. Click Start - Control Panel - System and Maintenance - System -
Device Manager.
2. In the “Device Manager” window, the name of the External SuperMulti
Drive appears under “DVD/CD-ROM drives” if the driver is installed
properly.
General Use
How to Use the Drive
When the LED is Orange, do not turn the PC off or remove the External
SuperMulti Drive as it may cause damage to the drive.
How to Use a Horizontally Installed Drive
You can use 8cm or 12cm (3.15 Inch or 4.72 Inch) discs.
The drive cannot read the disc properly if any part of the disc is placed
outside the tray guidelines.
Do not use the external SuperMulti drive vertically.
CAUTION