Installing, Connecting to your computer – Toshiba External SuperMulti Drive User Manual

Page 11

Text mode
Original mode

User’s Manual

EN-11

TOSHIBA External SuperMulti Drive

Installing

Connecting to your computer

1. Connect the USB cable to the drive’s USB connector.

2. Connect the other end of the of the USB cable to your computer.

1. Normal operation is not guaranteed if you use a USB HUB
or unspecified cables.
2. PCs with insufficient USB bus power may not work
properly if using a single-port USB bus power. To avoid this,
use two ports in conjunction for power enhancement.
3. If your computer is not equipped with a USB connector,
install a USB interface card.

NOTE