Brother MFC-3200C - Manual (Page 26)

24
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the MFC” on pages 2 to 9.
1
Unplug the MFC from the AC outlet and
disconnect it from your Macintosh if you
already connected an interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM into your CD-
ROM drive.
4
Double-click MFL PRO Suite Driver Installer
to install the printer and scanner drivers.
5
After the installation is completed, restart
your Macintosh
®
.
6
Connect the Filter core and Cable tie to USB
cable.
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the MFC.
Do not connect the MFC to a USB
port on a keyboard or a non
powered USB hub.
7
Turn on the MFC by plugging in the power
cord.
8
From the Apple
®
menu, open the Chooser .
For Mac
®
OS 8.5 - 9.2 Users
Step 2