Brother MFC-3200C - Manual (Page 16)

14
Installing the Driver & Software
Make sure that you followed the instructions in steps 1 to 12 on pages 12 to
13.
C
When this screen appears, turn on the MFC
by plugging in the power cord.
Connect the Filter core and Cable tie to USB
cable.
Connect the USB interface cable to your
PC, and then connect it to the MFC.
.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
D
Select BRUSB: USB Printer Port, and then
click Next.
E
Accept the default Printer name by selecting
Yes, and then click Next.
F
Select Yes (recommended), and then click
Finish. A test page will be printed so you
can check the print quality.
G
If the test page is printed correctly, click
Yes. If you click No, follow the prompts on
the screen to correct the problem.
For Windows
®
98/98SE/Me/2000 Professional Users
For Windows
®
98/98SE/Me Users
Step 2