Pioneer DEH-80PRS - Manual (Page 20)

2 Press M.C. and hold to switch between
left/right common mode and left/right in-
dependent mode.
L/R (left/right common mode)
—Left (left)—
Right (right)
3 Adjust these functions as desired.
Using the position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector function lets you automatically
adjust the speakers
’ output levels and inserts
a delay time to match the number and posi-
tion of occupied seats.
1 Use M.C. to select POSI in the audio
function menu.
Refer to Introduction of audio adjustments on
the previous page.
2 Turn LEVER to select a listening posi-
tion.
OFF (off)
—Front Left (front seat left)—
Front Right (front seat right)
—Front (front
seats)
—All (all seats
)
Using balance adjustment
You can select a balance setting that provides
an ideal listening environment in all occupied
seats.
! This function is only available in 3-way net-
work mode .
1 Use M.C. to select BAL.
Refer to Introduction of audio adjustments on
the previous page.
2 Turn LEVER to adjust the left/right
speaker balance.
Left 25 to Right 25 is displayed as the left/
right speaker balance moves from left to right.
Using fader/balance adjustment
You can change the fader/balance setting to
provide an ideal listening environment for all
of the occupied seats.
! This function is only available in standard
mode .
1 Use M.C. to select F/B.
Refer to Introduction of audio adjustments on
the previous page.
2 Turn LEVER to adjust the front/rear
speaker balance.
Front 25 to Rear 25 is displayed as the front/
rear speaker balance moves from front to rear.
# Select F/R 00 when only using two speakers.
3 Press M.C. to display the left/right
speaker balance mode.
4 Turn LEVER to adjust the left/right
speaker balance.
Left 25 to Right 25 is displayed as the left/
right speaker balance moves from left to right.
Using time alignment
The distance between the listening position
and each speaker can be adjusted with this
function.
1 Use M.C. to select TA1 in the audio
function menu.
Refer to Introduction of audio adjustments on
the previous page.
2 Turn LEVER to select the time align-
ment.
Initial (initial)
—Custom (custom)—Auto TA
(auto-time alignment)
—OFF (off)
! Initial is the factory supplied time align-
ment.
! Custom is an adjusted time alignment that
you can create for yourself.
! Auto TA is the time alignment created by
auto TA and EQ. (Refer to Auto TA and EQ
(auto-time alignment and auto-equalizing)
on page 27.)
En
20
Section
02 Operating this unit